Initial Qualification AS6070/5 and /6 Test Summary
测试数据, 140.03 KB
The following tests were performed by the QPL Lab as designated in the Request for Samples for Retention of Qualification Testing of AS6070/5 and /6 NAVAIR letter dated 6 June 2016. Samples provided passed all testing as required in the AS6070 Specification.
Torque Table: GORE® Universal Pipe Gasket (Style 800) on EN Glass-Lined Steel Flange
安装指南, 技术信息, 221.31 KB
GORE Universal Pipe Gasket (Style 800): Gasket on Glass-Lined Steel Flange. To achieve a reliable seal, adequate gasket stress must be applied during installation. This table provides an estimation of torque for use during assembly of standard pipe flanges.
Torque Table: GORE® Universal Pipe Gasket (Style 800) or GORE® GR Sheet Gasketing, Ring or Full Face, on ASME Raised Face Steel Flange
安装指南, 技术信息, 180.71 KB
GORE Universal Pipe Gasket (Style 800) & GORE GR Sheet Gasketing: Ring or Full Face Gasket on Raised Face Steel Flange. To achieve a reliable seal, adequate gasket stress must be applied during installation. This document provides an estimation of torque for use during assembly of standard design steel pipe flanges.
GORE® Aerospace Ethernet Cables - Termination Instructions - TE Connectivity® CeeLok FAS-X®
技术信息, 1.14 MB
These procedures should be used as a guide in conjunction with current connector manufacturing instructions.
Describes the components of Gore’s Installation Simulator that replicates the rigorous conditions a microwave airframe assembly experiences while being routed during installation in an aircraft.
The following procedures are based on Gore’s best practices for inspecting, reusing, and repairing GORE™ SKYFLEX™ Aerospace Materials.
These procedures should be used as a guide in conjunction with current connector manufacturing instructions.
Includes performance results for a 10-meter cable assembly with a plug and receptacle connector based on RCN9034-24.